ACC-C10-6628 - BRM REP. BLK WHEEL -BUS 71-79 - VANAGON 80-92 - 15 IN. x 5.5 IN. WIDE (5X112MM)

ACC-C10-6628 - BRM REP. BLK WHEEL -BUS 71-79 - VANAGON 80-92 - 15 IN. x 5.5 IN. WIDE (5X112MM) - 15 X 5-1/2 - CENTER CAP AND MOUNTING HARDWARE IS SOLD SEPARATELY (SHIPPING CHARGES APPLY)

Phone-in/Mailorder Price CAD $249.93
Website Discount Price CAD $175.95
Hot VWs Magazine Special! CAD $131.95
You save CAD $117.98!

Stock Status:In Stock
Product Code: ACC-C10-6628

Qty:

Description

Backspacing: 3 3/4"

Another Cip1.com exclusive, you will NOT find these wheels anywhere else in North America!!

Also now available in silver...see part number ACC-C10-6665

We import this very high quality and beautiful BRM replica wheel from Europe. These wheels are not the same as the Flat4 wheels which have been available in the past. Our BRM wheels come with a beautiful clear coat finish which will not allow the aluminum to tarnish. Do not use harsh chemical cleaners on these wheels as it can damage the clear coat finish. The center cap and the wheel mounting bolt kits are sold separately. Use mounting hardware kit ACC-C10-6684 for 71-79 BUS & ACC-C10-6687 for 80-92 VANAGON. Sold each

CENTER CAPS ARE NOW SOLD SEPARATELY. We offer two versions of center cap to fit this wheel, both have the original SPEEDWELL-BRM logo. One is the flat style which fits most Beetle, Ghia, Type-3 applications. The other is our extra TALL cap, which is designed for applications such as Bus and very early Beetle, which have a very tall center bearing or axle hub which extends beyond the face of the wheel. Please see part number ACC-C10-6605 or ACC-C10-6608, or click here.
15 inch diameter x 5.5 inches wide - backspacing: 3-1/4 inch.

Special note: These wheels will fit your bus with a 165/15 (ACC-C10-6655) tire, or a 195/50/15 tire (ACC-C10-6723).Westfalia owners may require a 8 ply tire, if so check with your local tire dealer for a 15 inch 8 ply tire to handle the weight of your Westfalia. If you want to install a larger or wider tire on your bus you may require rear fender modifications. You may choose to machine the mounting pad (back of wheel) 1/8 to 1/4 inch maximum to allow these wheels to tuck in further on the back of your bus. Please be advised that CIP does NOT recommend this and CIP will take no responsibility or warrant the structural integrity of the wheel. We have sold 100's of these wheels over the past few years with great feedback from our loyal customers.