These are the ultimate in cam follower / lifter technology. These 1 piece billet Hi-performance racing lifters with built in oiling galleys provide the very best oiling to cam lobes for greatly improved lifter and cam lobe life. These are the perfect match for any performance camshaft- pre-clearance and lightweight followers will help reduce valve float at high RPM's. Made from 1 piece billet chromoly billets and then precision ground and heat treated for the correct hardness. The first choice of most top engine builders. You must replace the cam followers when installing a new camshaft .Cam and followers mate too each other- so when you use used followers with a new cam- the worn lifters will ware out the lobes of the new cam. All warranties for any new cam can only be offered if you buy and use new followers from C.I.P. at the time you purchase your new cam. Stock followers are not designed to work with performance camshafts. You will need to check the clearance between the tip of the cam lobe and the lifter to make sure there is a minimum of .040 inch clearance. We offer a wide selection of lightweight racing lifters in various sizes, with or without oiling holes.
Click here to view your options.