These seat belts feature attractive starburst push-button buckles and chrome belt ends. The retractable lap and shoulder belts have twenty inches of webbing on the buckle side, making them ideal for the bench seats found in your classic. These retractors are very small, just three inches wide by two inches tall. They can be installed in the tightest spaces. The retractors function in either the vertical or horizontal position. This system uses an advanced internal retractor that locks to support both the upper and lower parts of the body in the event of a sudden stop. The retractor holds 96 inches of webbing, with 39 inches of webbing outside for a total of over 11 feet of belt. Our seat belts meet or exceed Federal Motor Vehicle Safety Standards. Mounting hardware is available separately. Sold each, per seat belt.
These seat belts meet or exceed Federal Motor Vehicle Safety Standards FMVSS 209 and FMVSS 302.
Twenty-inches of webbing on buckle side.
Internal locking retractor measures 3-inches wide by 2-inches tall.
Starburst push-button buckle and chrome belt ends.
20 inches of webbing on the buckle side, making them ideal for the bench seats.
Webbing measures 1 7/8 inches wide.
135-inches of webbing on retractor side, 20 inches on buckle side.
Buckles measure 2 by 2 inches.
Chrome belt ends.
Economical solution to your seat belt needs.
Fabrication skills may be required to establish shoulder anchor point – please consult a professional installation specialist.
These seat belts are not designed to work with vehicles that have electric seat belt warning systems.
Mounting hardware is available separately.
Made in Taiwan.