Description
This rubber grommet fits into the top of the master cylinder where the plastic feed tube fits. These need to be replaced if they are cracked, as this will allow air into your brake system.
The grommet has an OD of 16.75mm
The grommet has an ID of 7.50mm
The bore in the master cylinder where this grommet fits will have an OD of 15.00mm
The grommet has an OD of 16.75mm
The grommet has an ID of 7.50mm
The bore in the master cylinder where this grommet fits will have an OD of 15.00mm
