Description
We now offer this floor plate / pan half made by Kaeferland of Germany. These are exact reproductions of the original with all the correct rib impressions. Includes the rear cross brace, jack support and side seat track rails. Rear cross brace, jack support and side seat track rails are NOT pre-installed and will require welding. The center seat pedestal in NOT included. You can re-use your original, or purchase a new unit, see part number C24-113-801-402-A
SPECIAL NOTE ABOUT SCRATCHES AND DENTS, PLEASE READ CAREFULLY BEFORE YOU PURCHASE!
After traveling thousands of miles over rough seas, they finally arrive into our warehouse. We inspect every pan section that we receive and only sell pan sections which will perform the job of replacing rusted out old floor pans properly. You must expect that the floor pan replacement sections you will receive, from Cip1.com or any other importer will have some scratching to the rust protective paint and small dents and bends to the metal from rough ocean transport. We will not sell floor pans with damage that will interfere with the function of the repair section, but you must expect that you will need to straighten any bent corner and repaint the floor pan sections after they have been welded into place. Floorpan sections are not returnable for any reason.
SPECIAL NOTE ABOUT SCRATCHES AND DENTS, PLEASE READ CAREFULLY BEFORE YOU PURCHASE!
After traveling thousands of miles over rough seas, they finally arrive into our warehouse. We inspect every pan section that we receive and only sell pan sections which will perform the job of replacing rusted out old floor pans properly. You must expect that the floor pan replacement sections you will receive, from Cip1.com or any other importer will have some scratching to the rust protective paint and small dents and bends to the metal from rough ocean transport. We will not sell floor pans with damage that will interfere with the function of the repair section, but you must expect that you will need to straighten any bent corner and repaint the floor pan sections after they have been welded into place. Floorpan sections are not returnable for any reason.
