Our windshield washer kit operates on a 12 volt system and is for universal applications. When installing any electrical component- it's recommended that you disconnect the ground cable from your battery before you start. Start by finding a suitable location for mounting the washer reservoir. You can mount it with the bolts and wing nuts provided or use some self tapping screws & washers. You will need to mount the ON-OFF switch on your dash for activating the electric pump. Temporarily reconnect your battery and use a test light to find a power source at your fuse box. Attach a wire from the fuse box to the switch. It does not matter which terminal on the switch you use for connecting power to. Use the second terminal on the switch to run power to the "+" terminal on the pump. The remaining terminal on the pump will be for your ground wire. Now that everything is wired up- connect the clear plastic hose from the pump to your existing windshield washer nozzle. Make sure the hose fits very snug to prevent any leaks. You may have to purchase some additional hose which are readily available from most automotive stores. Fill the reservoir with washer fluid- reconnect your battery and you're ready for diving!
(Bottle measurements: 6-1/2 inches tall from top of filler neck - 6 inches wide - 2 inches deep)